Recommended Hardware Requirement
| OS | Windows 8 / 10 (64bit) |
| CPU | Intel® CoreTM i7, i9, Intel® Xeon® |
| Memory | Standard Edition: 8GB and over Extended Edition: 16GB and over *Analyzable model size depends on memory size |
| Graphics | Discrete: NVIDIA®, AMD Integrated: Intel® IrisTM Graphics |
| Display | Resolution 1280×1024 and over |
| Storage | Disk space 100GB and over *Particularly required for saving project (Project data can be saved in external storage) |
Recommended Hardware Requirement
OS
Windows 8 / 10 (64bit)
Windows 8 / 10 (64bit)
CPU
Intel® CoreTM i7, i9, Intel® Xeon®
Intel® CoreTM i7, i9, Intel® Xeon®
Memory
Standard Edition: 8GB and over
Extended Edition: 16GB and over
*Analyzable model size depends on memory size
Standard Edition: 8GB and over
Extended Edition: 16GB and over
*Analyzable model size depends on memory size
Graphics
Discrete: NVIDIA®, AMD
Integrated: Intel® IrisTM Graphics
Discrete: NVIDIA®, AMD
Integrated: Intel® IrisTM Graphics
Display
Resolution 1280×1024 and over
Resolution 1280×1024 and over
Storage
Disk space 100GB and over
*Particularly required for saving project
(Project data can be saved in external storage)
Disk space 100GB and over
*Particularly required for saving project
(Project data can be saved in external storage)
Recommended CT Scanning Condition
| Scanning | X-ray computed tomography scanner （MRI is available only for extracting geometry） |
| Voltage of X-ray tube | Approximately 120kV |
| Gantry tilt | 0 degrees |
| Slice thickness | Femur: 3mm and under, if possible 1-2mm Spine: 2mm and under, 1mm for higher accuracy Jawbone: 1mm and under, 0.5mm for higher accuracy |
| Reconstruction kernel | Soft-tissue or raw data |
*CT scan with bone density calibration phantom is recommended to calibrate bone density strictly.
Recommended CT Scanning Condition
Scanning
X-ray computed tomography scanner
(MRI is available only for extracting geometry)
X-ray computed tomography scanner
(MRI is available only for extracting geometry)
Voltage of X-ray tube
Approximately 120kV
Approximately 120kV
Gantry tilt
0 degrees
0 degrees
Slice thickness
Femur: 3mm and under, if possible 1-2mm
Spine: 2mm and under, 1mm for higher accuracy
Jawbone: 1mm and under, 0.5mm for higher accuracy
Femur: 3mm and under, if possible 1-2mm
Spine: 2mm and under, 1mm for higher accuracy
Jawbone: 1mm and under, 0.5mm for higher accuracy
Reconstruction kernel
Soft-tissue or raw data
Soft-tissue or raw data
*CT scan with bone density calibration phantom is recommended to calibrate bone density strictly.